Email: info@artprimo.com^
|
||
|
Try our best selling Molotow Super Skinny cap for clean, thin lines and detail work. This cap delivers
... more▾
|
||
Reviews (28) 4.5 of 5 Stars!
PHL 06/25/2009
God damn, a friend gave me some of these and I decided to use them for my part on this little production wall. Used some belton for the fill and it just sprays the paint so slow and smooth, I used this on a rusto for the outline, the low pressure on this thing is fantastic, not only is it great for painting, but my finger isn't aching like hell after 3 1/2 hours painting. 5/5, I wish I could rate it higher! 5 of 5 Stars!
helpful?
God damn, a friend gave me some of these and I decided to use them for my part on this little production wall. Used some belton for the fill and it just sprays the paint so slow and smooth, I used this on a rusto for the outline, the low pressure on this thing is fantastic, not only is it great for painting, but my finger isn't aching like hell after 3 1/2 hours painting. 5/5, I wish I could rate it higher! 5 of 5 Stars!
helpful?
Bobby Hampton 04/06/2018
These are nice, I I've been using them on Belton cans. They're comparable to the GO3, but there is absolutely no delay in spray cut off when you lift your finger, unlike the GO3. They have minimal Flair which I prefer for an outline cap, and get very very skinny if you ask them to. This will probably be my go-to outline cat moving forward, the paint Flows at a manageable rate, and you can have a little wobble in your distance from the surface without seeing huge variation in line thickness. There may be a better outline cap out there, but for someone like me who is not an expert, this one seems easiest to work with. 5 of 5 Stars!
helpful?
These are nice, I I've been using them on Belton cans. They're comparable to the GO3, but there is absolutely no delay in spray cut off when you lift your finger, unlike the GO3. They have minimal Flair which I prefer for an outline cap, and get very very skinny if you ask them to. This will probably be my go-to outline cat moving forward, the paint Flows at a manageable rate, and you can have a little wobble in your distance from the surface without seeing huge variation in line thickness. There may be a better outline cap out there, but for someone like me who is not an expert, this one seems easiest to work with. 5 of 5 Stars!
helpful?
Ma.destruction 03/18/2014
With the new valves on Rusto cans, it's hard to get a thin line with any cap, but I've found that overall, these work the best on an adapter with Rusto. You might be able to get a slightly thinner line with a Gold dot, but you're going to go through a sh*tload of caps. I usually outline with euro cans when I'm piecing but if I end up in a situation where I need to use Rusto for an outline or any small details, these are def the best caps for it. 5 of 5 Stars!
helpful?
With the new valves on Rusto cans, it's hard to get a thin line with any cap, but I've found that overall, these work the best on an adapter with Rusto. You might be able to get a slightly thinner line with a Gold dot, but you're going to go through a sh*tload of caps. I usually outline with euro cans when I'm piecing but if I end up in a situation where I need to use Rusto for an outline or any small details, these are def the best caps for it. 5 of 5 Stars!
helpful?
BLOO CI∆ 10/30/2013
oh and they work really well on colorplace as long as you twist them in 5 of 5 Stars!
helpful?
oh and they work really well on colorplace as long as you twist them in 5 of 5 Stars!
helpful?
BLOO Ci∆ 10/26/2013
nice nice cap
its like a slower cleaner version of a german 3
like if a black dot, german outline, and a gold dot had a kid
its not super skinny
but it has nice skinny clean lines for outlines and cuts
i only do characters. and i do a lot of shading and details
this cap, german outline 3, and Ny fats are all i fux with
definitely recommend this 5 of 5 Stars!
helpful?
nice nice cap
its like a slower cleaner version of a german 3
like if a black dot, german outline, and a gold dot had a kid
its not super skinny
but it has nice skinny clean lines for outlines and cuts
i only do characters. and i do a lot of shading and details
this cap, german outline 3, and Ny fats are all i fux with
definitely recommend this 5 of 5 Stars!
helpful?
JAKO 04/20/2011
Awesome cap! if you want super clean thin lines (not like the germans), then this is it. Tried it on Beat, Mtn94 and Molotow LP, all were great. Spray is so slow, but with good coverage, maybe about 1/2 inch to 5/8 inch. Tried it on Mtn Hardcore and the stem doesnt seem to quite fit, however, still worked great just a bit messy. 5 of 5 Stars!
helpful?
Awesome cap! if you want super clean thin lines (not like the germans), then this is it. Tried it on Beat, Mtn94 and Molotow LP, all were great. Spray is so slow, but with good coverage, maybe about 1/2 inch to 5/8 inch. Tried it on Mtn Hardcore and the stem doesnt seem to quite fit, however, still worked great just a bit messy. 5 of 5 Stars!
helpful?
Tequila Mockingbird 01/06/2011
This cap and NYFs are all I need when I paint. These are consistently the best cap. It is not the thinnest so don't get it twisted. It reliably is good for not clogging or exploding on cans, consistent line and dot (does not horse-shoe out like universals) with a perfect dot and works with controlling high pressure and tall cans. 5 of 5 Stars!
helpful?
This cap and NYFs are all I need when I paint. These are consistently the best cap. It is not the thinnest so don't get it twisted. It reliably is good for not clogging or exploding on cans, consistent line and dot (does not horse-shoe out like universals) with a perfect dot and works with controlling high pressure and tall cans. 5 of 5 Stars!
helpful?
SRT8 12/23/2009
This isn't my favorite skinny cap, but on a low pressur paint, it creates some really nice thin lines. It works especially well on Ironlak for detail work. Thin-medium lines on Hardcore. Worth giving a shot - I think this is a preference cap. 4 of 5 Stars!
helpful?
This isn't my favorite skinny cap, but on a low pressur paint, it creates some really nice thin lines. It works especially well on Ironlak for detail work. Thin-medium lines on Hardcore. Worth giving a shot - I think this is a preference cap. 4 of 5 Stars!
helpful?
s0e76 01/12/2009
i got it free with my order and the lines are very thin and crisp.....id recomend them..... 4 of 5 Stars!
helpful?
i got it free with my order and the lines are very thin and crisp.....id recomend them..... 4 of 5 Stars!
helpful?
puerto_sk8tr 12/02/2008
when they say skinny, they mean it. i got two samples, they kick ass. i just ordered some now. go get'em 4 of 5 Stars!
helpful?
when they say skinny, they mean it. i got two samples, they kick ass. i just ordered some now. go get'em 4 of 5 Stars!
helpful?
Case-One 11/27/2008
do these cap work on montana cause can2 uses them on montana so idk 5 of 5 Stars!
helpful?
do these cap work on montana cause can2 uses them on montana so idk 5 of 5 Stars!
helpful?
Anonymous 09/25/2008
just tried these out yesterday on the rusto paints...sick lines, gets real skinny. good, not great preasure. i noticed that it would loose preasure (rarely) from time to time but bounce right back. i did have a coulple of incedents where paint shot out from underneath the cap and onto my hand, but that was due to operator error. But all around dope f*cking cap. MUST HAVE!!! thanks for the samples AP 5 of 5 Stars!
helpful?
just tried these out yesterday on the rusto paints...sick lines, gets real skinny. good, not great preasure. i noticed that it would loose preasure (rarely) from time to time but bounce right back. i did have a coulple of incedents where paint shot out from underneath the cap and onto my hand, but that was due to operator error. But all around dope f*cking cap. MUST HAVE!!! thanks for the samples AP 5 of 5 Stars!
helpful?
B@$$ PlAyA 07/25/2008
These caps are alright, not to good for piecing. little bit smaller than a ny thin. 2 of 5 Stars!
helpful?
These caps are alright, not to good for piecing. little bit smaller than a ny thin. 2 of 5 Stars!
helpful?
NOUKuno 04/29/2008
DRIPPY AS F**K ON KRYLON.. I DONT KNOW ABOUT RUST-OLEUM BUT NICE THIN AND NO DRIPS ON BELTON 5 of 5 Stars!
helpful?
DRIPPY AS F**K ON KRYLON.. I DONT KNOW ABOUT RUST-OLEUM BUT NICE THIN AND NO DRIPS ON BELTON 5 of 5 Stars!
helpful?
ganstahomie23@gmail.com 04/24/2008
this is good for fine tip things like handwork and detail 4 of 5 Stars!
helpful?
this is good for fine tip things like handwork and detail 4 of 5 Stars!
helpful?
Cpt. Crunch 03/25/2008
GO3 are the skinnyest cap for molotow
but it does make a pretty good outline 4 of 5 Stars!
helpful?
GO3 are the skinnyest cap for molotow
but it does make a pretty good outline 4 of 5 Stars!
helpful?
AleO 03/19/2008
This cap isn't as thin as people make it out to be. I used it on a molotow can, I found that the stock molotow cap was much thinner than this one. It does a really nice medium line though. 3 of 5 Stars!
helpful?
This cap isn't as thin as people make it out to be. I used it on a molotow can, I found that the stock molotow cap was much thinner than this one. It does a really nice medium line though. 3 of 5 Stars!
helpful?
gurG 03/04/2008
dope cap...i juss tried it out last nite. Copped like 6 from California. Makes perfect outlines & scribes...i use em on rustoleum & walmart. 4 of 5 Stars!
helpful?
dope cap...i juss tried it out last nite. Copped like 6 from California. Makes perfect outlines & scribes...i use em on rustoleum & walmart. 4 of 5 Stars!
helpful?
EKSPO 12/08/2007
good caps for beltons.bad for anything else. uni thins are the way to go 4 of 5 Stars!
helpful?
good caps for beltons.bad for anything else. uni thins are the way to go 4 of 5 Stars!
helpful?
